NPV internal FLOGI rejected by the upstream switch?

Unanswered Question
Aug 15th, 2010
User Badges:

Trying to connect 9124e blade switches to 9513 core switch.


cfs distribution enabled

vsans matches


on 9124e

     - npv enabled

     - host ports set to F

     - external uplinks set to NP

     - flex-attach enabled on host ports


on 9513

     - npiv enabled

     - ports set to F


now the uplink ports and ports and core switch are stuck in "init" state and npv status as follows



#show npv status

npiv is disabled

disruptive load balancing is disabled

External Interfaces:
====================
  Interface:   ext1, State: Failed(NPV internal FLOGI rejected by the upstream switch, Reason: 0x5, Reason Expl: 0x0)
  Interface:   ext2, State: Failed(NPV internal FLOGI rejected by the upstream switch, Reason: 0x5, Reason Expl: 0x0)

  Interface:   ext3, State: Pre-Initialized
  Interface:   ext4, State: Pre-Initialized

  Number of External Interfaces: 4

Server Interfaces:
==================
  Interface:   bay6, VSAN:  100, State: Waiting for External Interface
  Interface:   bay5, VSAN:  100, State: Waiting for External Interface
  Interface:   bay7, VSAN:  100, State: Waiting for External Interface
  Interface:   bay4, VSAN:  100, State: Waiting for External Interface
  Interface:   bay3, VSAN:  100, State: Waiting for External Interface
  Interface:   bay2, VSAN:  100, State: Waiting for External Interface
  Interface:   bay1, VSAN:  100, State: Waiting for External Interface
  Interface:   bay8, VSAN:  100, State: Waiting for External Interface


Any clues?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content

 

 

Trending Topics: Storage Networking