08-15-2010 03:55 AM
Hello
Configuration as below :
dial-peer voice 1023 pots
service mgcpapp
port 0/2/3
According to the above configuration if I WANT TO delete a defined dial peer by using
# no dial-peer voice 1023 pots
It will also deleted the services and port 0/2/3 which are running under this dial-peer without any effect to other dial peer configuration at gateway. or else its enough this command to delete the dial peer along .
Thanks i advance .
Solved! Go to Solution.
08-17-2010 08:12 AM
'no dial-peer voice 1023 pots' will remove the entire dial-peer, and all of it's sub-configuration.
If you just need to remove the 'service mgcpapp' config, 'default service' should do that.
-Steve
08-17-2010 08:12 AM
'no dial-peer voice 1023 pots' will remove the entire dial-peer, and all of it's sub-configuration.
If you just need to remove the 'service mgcpapp' config, 'default service' should do that.
-Steve
09-16-2010 03:09 PM
Hi Steven
Thanks for your helpful information.
I have one more question to clear . Presently iam working at CCM 5.0 with Administration Account . I would like to create CCM new account for new
trainee engineer with limited access i.e Standard CCM Phone Administration and Management only . like adding new ip Phone change the existing user name and extension only
So please advice how to create an new CCM Account with the above limited Access.
Highly apprecited for your quick response .
02-01-2011 11:53 PM
Hi Syed,
You can achieve your need by creating Roles & Usergroups under USERMANAGEMENT
Make use of the below document for step-by-step configuration
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_4/ccmcfg/b08role.html#wp1059943
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide