Route-map with tracking

Answered Question
Aug 15th, 2010
User Badges:
  • Bronze, 100 points or more

Dear Experts ,



I Put an SLA as given below to track a route-map .The SLA stat showing up , but when I do show route-map its showing   [undefined] . Is there is anything missing ?


ip sla 1
icmp-echo 192.168.111.5 source-ip 192.168.111.6
timeout 2000
frequency 5
ip sla schedule 1 life forever start-time now


route-map UPSTREAM_TRAFFIC permit 10
match ip address 104
set ip next-hop verify-availability 192.168.111.5 10 track 1
set ip default next-hop 2.2.2.2

***********************************************************8

show ip sla monitor stati


Round Trip Time (RTT) for       Index 1
        Latest RTT: 7 milliseconds
Latest operation start time: *12:07:01.571 UTC Sun Aug 15 2010
Latest operation return code: OK
Number of successes: 83
Number of failures: 0
Operation time to live: Forever

**********************************************************

show route-map


route-map UPSTREAM_TRAFFIC, permit, sequence 10
  Match clauses:
    ip address (access-lists): 104
  Set clauses:
    ip next-hop verify-availability 192.168.111.5 10 track 1  [undefined]

Correct Answer by Giuseppe Larosa about 6 years 10 months ago

Hello Haris,

you need a configuration line that defines tracking object 1 as using ip sla 1


see

http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html#wp1087990


track 1 rtr 1 reachability


where the second 1 refers to ip sla 1 object


Hope to help

Giuseppe

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Haris P Sun, 08/15/2010 - 05:38
User Badges:
  • Bronze, 100 points or more

Hmmm,


It's a small mistake , I Put the below commands and it came up


track 1 ip sla 1

!

track 2 ip sla 2


Regards,

haris

Actions

This Discussion