How to switch DSN & Cast using DMP Remote on DMM 5.2.1

Answered Question
Aug 15th, 2010
User Badges:

Hi All,


would you please let me know how do we programe DMP remote control buttons to switch DSN (Digital Signage) & Cast ?

also let me know step by step if you could.


Thanks

Sinhara.

Correct Answer by Tomas De Leon about 6 years 7 months ago

Please elaborate on what you are trying to do.


The DMP remote control is used for navigation for Cast.

They can not be programmed and the remote would have

no effect on non-Cast presentation or video on a Digital Sign


Cheers


T.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Tomas De Leon Mon, 08/16/2010 - 14:09
User Badges:
  • Cisco Employee,

Please elaborate on what you are trying to do.


The DMP remote control is used for navigation for Cast.

They can not be programmed and the remote would have

no effect on non-Cast presentation or video on a Digital Sign


Cheers


T.

Sinhara Prasad Silva Mon, 08/16/2010 - 15:21
User Badges:

i received below instruction from Cisco to programe remote

on DMP but it will not work on DMM 5.2. i need to find out correct configuration ?


--> RED Remote button to start a sign presentation

http://192.168.1.102:7777/set_param?irasrv.key_RED=ira add 1 sh 1 RED fg sendcmd 127.0.0.1:5555 "http://192.168.1.1:8080/xTAS-core/api/xml/app/playlist/start_playlist_37_.htm"

--> Instruct the DMP to start the ETV daemon

http://192.168.1.104:7777/set_param?init.BROWSER_CMD=http://192.168.1.1:8080/etv-flash-webapp/app/etv_22_.htm

--> Instruct the DMP to  start a sign presentation

http://192.168.1.104:7777/set_param?init.BROWSER_CMD=http://192.168.1.1:8080/xTAS-core/api/xml/app/playlist/start_playlist_37_.htm

Tomas De Leon Tue, 08/17/2010 - 07:08
User Badges:
  • Cisco Employee,

Sinhara,


My apologies, I stand corrected.  I researched further and play around in my lab

to see if I could get this to work and I successfully configured the color buttons

similar to what you are trying to do.  This is what I found out.




VARIABLES

=========

  admin           = DMP Web Account Username

  default         = DMP Web Account Password

  a.b.c.d         = IP Address of DMP

  dmm.company.com = FQDN of the Digital Media Manager(DMM) Appliance


MIBS

====


** Use the Following MIB to see the CURRENT Remote Mappings


https://admin:[email protected]:7777/get_param?p=*.*&init.pop_enable=false



** Configure Buttons


RED

https://admin:[email protected]:[email protected][email protected]Dwww.cisco.com%22


GREEN

https://admin:[email protected]:[email protected][email protected]MD%3Dhttp://www.google.com%22


YELLOW

https://admin:[email protected]:[email protected][email protected]_CMD%3Dhttp://www.yahoo.com%22


BLUE

https://admin:[email protected]:[email protected][email protected]%3Dhttp://www.apple.com%22



ASSIGN A BUTTON TO CAST

https://admin:[email protected]:[email protected][email protected]Dhttp://dmm.company.com:8080/etv-flash-webapp/app/etv_24_.htm%22



** Use the Following MIB to see the NEW CONFIGURED Remote Mappings


https://admin:[email protected]:7777/get_param?p=*.*&init.pop_enable=false



** Use the ADVANCED TASK to SAVE the DMP Settings.



I have tested these settings and they do work…


I hope this helps!


T.

Tomas De Leon Tue, 08/17/2010 - 10:59
User Badges:
  • Cisco Employee,

I provided the correct URL syntax above.  the URL you added is still incorrect please use the

exact syntax i provided with your specific variables following the legend I provided.


You do not have to have this as an Advanced Task.  You can do this directly from the DMP.  You can

also directly access the DMP-DM web admin and save settings.  You do not need a DMM.  I was just

stating an example.  The main concept is to SAVE settings after configuration.


You can do this directly via URL also.


https://admin:[email protected]:7777/set_param?mib.save=1


Please refer to the online DMM\DMP documentation for exact steps if you are confused or need to know

a configuration step.


Cheers!


T.

jasonseemann Mon, 12/13/2010 - 11:28
User Badges:

Great information.  I have tested this in my lab and have it working as well.  Very cool. 


I have a couple of follow up question:


1) I have a playlist of items (either a native playlist or a playlist embedded within a presentation).  What I'd like is to have the Fast Forward / Rewind buttons hop between playlist items (and perhapse PAUSE stay on an item).   Do you know if this is possible?


2) I'd like to program one of the colored buttons to tune directly in to a channel (udp://239.10.11.44:2341) without going through ETV.  Any thoughts?


3) How can I have a colored button load the appropriate page to start playing a video?  For example I have a .MPG stored at http://my.example.com/files/test.mpg that I want the TV to play (and loop) full screen when GREEN is pressed.



Thanks!

Actions

This Discussion

Related Content