Changing config from DSL to direct Connection

Unanswered Question
Aug 15th, 2010

This actually started as this:

https://supportforums.cisco.com/message/3157179#3157179

We moved from using DSL to using a dedicated connection. I'm pretty certain the following updated config will get me connected to my new connection:

Using 1316 out of 29688 bytes

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname 1721

!

boot-start-marker

boot-end-marker

!

no logging console

!

no aaa new-model

!

resource policy

!

mmi polling-interval 60

no mmi auto-configure

no mmi pvc

mmi snmp-timeout 180

!

!

no ip dhcp use vrf connected

ip dhcp excluded-address 192.168.0.1

!

ip dhcp pool LANpool

   network 192.168.0.0 255.255.255.0

   default-router 192.168.0.1

   dns-server 68.94.156.1 68.94.157.1

   lease infinite

!

!

ip cef

!

!

!

!

!

interface ATM0

no ip address

shutdown

no atm ilmi-keepalive

dsl operating-mode auto

!

interface FastEthernet0

description $ETH-WAN$

ip address 206.81.98.xxx 255.255.255.252

speed auto

!

interface FastEthernet1

!

interface FastEthernet2

description Connection to LAN

switchport access vlan 26

!

interface FastEthernet3

!

interface FastEthernet4

!

interface Vlan1

no ip address

!

interface Vlan26

ip address 192.168.0.1 255.255.255.0

ip nat inside

ip virtual-reassembly

!

ip route 0.0.0.0 0.0.0.0 206.81.98.xxx

no ip http server

no ip http secure-server

!

!

!

!

!

control-plane

!

!

line con 0

line aux 0

line vty 0 4

login

!

end

Can anybody see why this wouldn't work? I can plug the IP address, GW and NM into my laptop and connect just fine.

Hmm....thanks in advance for any help.

Jon

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Giuseppe Larosa Sun, 08/15/2010 - 12:51

Hello Jon,

NAT configuration is not complete

you need:

int fas0

ip nat outside

access-list 11 permit 192.168.0.0 0.0.0.255

ip nat inside source list 11 interface fas0 overload

Hope to help

Giuseppe

jwynacht Tue, 08/17/2010 - 07:40

Thanks! Turns out the rest of the config that I want to do is a little beyond my knowledge so I've got someone doing it for me.

I appreciate the help here though!

Cheers,

Jon

Actions

This Discussion