08-15-2010 06:41 PM - edited 03-06-2019 12:29 PM
Has anyone seen this log message before
when attempting to configure a 2-port layer 3 EtherChannel on the same line card (WS-X6148-GE-TX), the following syslog messages were generated.
Aug 12 16:15:58.497 EST: %PM-SPSTBY-3-INTERNALERROR: Port Manager Internal Software Error (is_unallocated: ../const/native-sp/pm_sp_vlan.c: 952: pm_get_standby_vlan)
-Traceback= 40F9BDC4 40F9BFAC 40F5F490 40F9C480 40F9C4E8 40F7D614 40F7D6A8 40F7E158 40F7E3E8 40F7E814 40BDE940 40BE67CC 40ED83FC 40ED6894 40F9EFE0 40FA01AC
Aug 12 16:15:58.497 EST: SPSTBY: pm_get_standby_vlan:Cannot allocate VLAN for GigabitEthernet2/48 VLAN 1026 is use by NDE 0
Aug 12 16:15:58.497 EST: %PM-SPSTBY-4-INT_VLAN_NOTAVAIL: Failed to allocate internal VLAN in Port Manager
The etherchannel is created ok and seems fully functional, is the log entry anything to worry about.
08-15-2010 06:59 PM
Traceback can only lead to one of two things: An IOS bug or a hardware failure. I'm suspecting you have a cosmetic bug.
08-15-2010 07:03 PM
Thanks for you input
I will explore the bug option further
08-15-2010 07:08 PM
Hello,
What is the code version you are running?
Regards,
NT
08-15-2010 07:29 PM
Thanks for you input
Cisco IOS Software, s3223_rp Software (s3223_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXH5, RELEASE SOFTWARE (fc1)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide