Etherchannel Setup

scruickshanks · ‎08-15-2010

Has anyone seen this log message before

when attempting to configure a 2-port layer 3 EtherChannel on the same line card (WS-X6148-GE-TX), the following syslog messages were generated.

Aug 12 16:15:58.497 EST: %PM-SPSTBY-3-INTERNALERROR: Port Manager Internal Software Error (is_unallocated: ../const/native-sp/pm_sp_vlan.c: 952: pm_get_standby_vlan)

-Traceback= 40F9BDC4 40F9BFAC 40F5F490 40F9C480 40F9C4E8 40F7D614 40F7D6A8 40F7E158 40F7E3E8 40F7E814 40BDE940 40BE67CC 40ED83FC 40ED6894 40F9EFE0 40FA01AC

Aug 12 16:15:58.497 EST: SPSTBY: pm_get_standby_vlan:Cannot allocate VLAN for GigabitEthernet2/48 VLAN 1026 is use by NDE 0

Aug 12 16:15:58.497 EST: %PM-SPSTBY-4-INT_VLAN_NOTAVAIL: Failed to allocate internal VLAN in Port Manager

The etherchannel is created ok and seems fully functional, is the log entry anything to worry about.

Leo Laohoo · ‎08-15-2010

Traceback can only lead to one of two things: An IOS bug or a hardware failure. I'm suspecting you have a cosmetic bug.

scruickshanks · ‎08-15-2010

Thanks for you input

I will explore the bug option further

Nagaraja Thanthry · ‎08-15-2010

Hello,

What is the code version you are running?

Regards,

NT

scruickshanks · ‎08-15-2010

Thanks for you input

Cisco IOS Software, s3223_rp Software (s3223_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXH5, RELEASE SOFTWARE (fc1)