NMS

Unanswered Question
Aug 16th, 2010
User Badges:

HI


Link_SW1 switch is not reachable from User_VLAN and Server_VLAN, it cannot be added to Network Management Server.

How can configure Link_SW1 switch that it communicates with NMS only but ip subnet of switch should be different then NM.

Link_SW1 is 2950 switch 24 ports.





{ISP1}-------------Internet_RTR1------Link_SW1-------LoadBalancer1------Firewall------L3Switch-----User_VLAN
                                                                               ||--------LoadBalancer2                                ||
                                                                                                                                                        ||
                                                                                                                                                   Server_VLAN
                                                                                                                                                         ++
                                                                                                                                           Network_Management_Server



Thanks ST

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jigar Dave Mon, 08/16/2010 - 03:50
User Badges:

diagram is not clear, can you give it in pdf or jpg format for better understanding and solve it

.

--Jigar

Actions

This Discussion