08-16-2010 03:22 AM - edited 03-04-2019 09:26 AM
HI
Link_SW1 switch is not reachable from User_VLAN and Server_VLAN, it cannot be added to Network Management Server.
How can configure Link_SW1 switch that it communicates with NMS only but ip subnet of switch should be different then NM.
Link_SW1 is 2950 switch 24 ports.
{ISP1}-------------Internet_RTR1------Link_SW1-------LoadBalancer1------Firewall------L3Switch-----User_VLAN
||--------LoadBalancer2 ||
||
Server_VLAN
++
Network_Management_Server
Thanks ST
08-16-2010 03:50 AM
diagram is not clear, can you give it in pdf or jpg format for better understanding and solve it
.
--Jigar
08-16-2010 04:12 AM
Hi
Please check the initial post now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide