Convert remote access vpn to split-tunnel help please...

Unanswered Question
praprama Mon, 08/16/2010 - 07:55

Hi,


You might find the below link helpful:


http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml#s2


Only modification you will need is to specify your local network (192.168.10./24) in the access-list in place of 10.0.1.0/24 in the above document.


I have linked the CLI specifically. You can find the steps to do the same using ASDM as well in the above document.


All the best!!


Thanks and Regards,

Prapanch

Actions

This Discussion