9 Meg IMA

soknetworkops · ‎08-16-2010

I have a 2811 ISR running 12.4.11 T4 IOS and need to configure it for a 9 meg IMA.

I can get all of the interfaces to work but not as a Full 9 Meg.

Either as 2 - 4.5's or 1 - 6 and 1 - 3 Meg

Is there anyway to get them to work as 1 - 9 Meg IMA?

2 - ATM/AIM cards

3 - VWIC-2MFT-T1/E1

card type T1 0 0
card type T1 0 1
card type T1 0 2

!

network-clock-participate wic 0
network-clock-participate wic 1
network-clock-participate wic 2
network-clock-participate aim 0
network-clock-participate aim 1
network-clock-select 1 T1 0/0/0
network-clock-select 2 T1 0/0/1
network-clock-select 3 T1 0/1/0
network-clock-select 4 T1 0/1/1
network-clock-select 5 T1 0/2/0
network-clock-select 6 T1 0/2/1

paolo bevilacqua · ‎08-16-2010

Each aim-atm support up to 4 member links in a bundle. Budling across different AIM modules is not supported, consequently the max speed using T1, is 6 mbps.

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080088753.html

If you want fast service, use ethernet / mpls, not atm ima.