Standby Router is ICMP?

Unanswered Question
Aug 16th, 2010

Trying to determine when I perform show standby the following appears:


GigabitEthernet0/1 - Group 2

  State is Active

    264 state changes, last state change 00:47:43

  Virtual IP address is 10.2.5.1

  Active virtual MAC address is 0000.0c07.ac02

    Local virtual MAC address is 0000.0c07.ac02 (v1 default)

  Hello time 1 sec, hold time 2 sec

    Next hello sent in 0.412 secs

  Preemption enabled, delay min 120 secs, sync 20 secs

  Active router is local

  Standby router is ICMP: , priority 110 (expires in 1.004 sec)

  Priority 120 (configured 120)

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Matthew Blanshard Mon, 08/16/2010 - 22:42

Can you post the configuration on the port? Taking a shot in the dark here but guessing you have standby redirects configured?


-Matt

Actions

This Discussion