Hi all experts. This question may be broad but since i have heard this term i thought i should know it as i progress in my voice studies.
What are software DSPs ? i know about HW DSPs like PVDM (2nd generation etc), but do we have software DSP in
1) Router like 2800, 2600 etc
2) CUCM (any version)
Can someone pls refer me a document that explain software DSPs in detail ? or any cisco press ebook ?
thanks alot in advance
There really are no SW DSPs, what you can do using SW and not HW DSPs is to create a SW MTP using IOS resources and in CUCM you get MTPs (with limited capabilities) and the SW CFB (again, limited capabilities). Unity can do some XCODING and use G729 but it's recommended you do this in HW because takes a lot from the CPU and resources from the server.
For CUCM the maximum values for each are already defined and cannot be increased unless you have a standalone server.
For IOS there are baseline values but they depend on what the ISR is already doing and how much load it has to know the real maximum you can set at any given point in time.
If this helps, please rate