08-17-2010 11:42 AM - edited 03-01-2019 02:20 PM
Hi,
am upgrade ios to router7600 but am upload new ios to sup-bootdisk only and then am reload the router i saw this log
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE120107Y3
2 0 4-subslot SPA Interface Processor-400 7600-SIP-400 JAE1052J698
5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL JAF1201AHCJ
6 0 Supervisor-Other Unknown Unknown
module 6 it can't boot.
am try to boot ios to last version but module 6 can't boot also.
Can anyone help me ?
08-20-2010 05:02 AM
Have you copied image to slavesup-bootdisk: as well ? Your standby is most likely stuck in ROMMON as bootvar is pointing to the image he cannot found on his flashdisk. Just connect to the console port of it, enter "boot", your system will end up in RPR redundancy mode, then copy image from active to standby and reload stanby (hw-module module..).
08-23-2010 09:42 AM
Why this slot can't boot from old ios on supboot-disk?
08-24-2010 01:05 AM
He can, but for that you need "boot system flash", otherwise if it wont find image to which startup-config is pointing, he will end up in the ROMMON.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide