cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
760
Views
0
Helpful
4
Replies

cisco mobile 8.0

jrmo
Level 1
Level 1

Has anyone gotton this to work on ccm 7.13 without rebooting the cluster? Is it really necessary?

4 Replies 4

Jaime Valencia
Cisco Employee
Cisco Employee

I assume you mean this since you don't mention reboot after what?

Making the Cisco Mobile 8.0 Device Available on Cisco Unified  Communications Manager

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cumc/cisco_mobile/iPhone/8_0/Cisco_Mobile_iPhone_8x_Admin_Guide.html#wp288341

If so, the answer is yes. Support for new devices requires a MANDATORY cluster reboot.


HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

yes, after installing the .cop file, the admin guide says rebo

ot.  You usually don't have to reboot after adding a new phone firmware..

thanks

Correct, but you're not adding a phone FW, you're adding a new device model.

Just look at the name of the procedure:

Making the Cisco Mobile 8.0  Device Available on Cisco Unified  Communications Manager


HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Jaime Valencia
Cisco Employee
Cisco Employee

The link is fine, try removing /partner from the url.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate