Door Entry System

Answered Question
Aug 17th, 2010
User Badges:

Hello All -


We have a customer who runs a clinic where he needs a door latch system.  The client will NOT have a pager at the door - the receptionist will need to physically see the patient walk to the door, then "Buzz" it open.


We can permantly designate a button for this feature if needed.


They have a 12V Electric Door Strike installed.  Does anybody have a config or experience with this that they can share?

Correct Answer by paolo bevilacqua about 6 years 8 months ago

As indicated above: YES.

Or you can use and intercom device and simply leave the voice portion disconnected.


Please remember to rate useful posts clicking on the stars below.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
paolo bevilacqua Tue, 08/17/2010 - 14:22
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Any device made to be connected to an FXS port will work.


In other words, any device made for any PBX will work.

Correct Answer
paolo bevilacqua Wed, 08/18/2010 - 02:49
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

As indicated above: YES.

Or you can use and intercom device and simply leave the voice portion disconnected.


Please remember to rate useful posts clicking on the stars below.

jwcasey007 Tue, 09/07/2010 - 15:16
User Badges:

Paolo,

we got the Viking RC3:

http://assets.twacomm.com/assets/pdf/4378.pdf 


What we need to know now is:


I have it to the point where the Viking RC-3 answers, but it then beeps twice and waits for the caller to enter digits to trigger one of the three relays..  I'm requesting from Cisco TAC that they provide a way for the UC540 to delay sending digits until after the Viking device answers

Actions

This Discussion