My Aironet 1310 present a error: flashfs[0]: unable to allocate available block, can i recovery?

Unanswered Question

Please:  help me about what do it. I connect by console and present this error and disable the keyboard,


Xmodem file system is available.
flashfs[0]: unable to allocate available block.


The system has been interrupted, or encountered an error
during initializion of the flash filesystem.  The following
commands will initialize the flash filesystem, and finish
loading the operating system software:


    flash_init
    ether_init
    tftp_init
    boot



bridge:

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Tue, 08/17/2010 - 15:55
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Using a TFTP Server to Return to a Previous Release

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918


Hope this helps.  Please don't forget to rate useful posts.  Thanks.

Leo Laohoo Thu, 08/19/2010 - 15:41
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Did you, by any chance, get this work?

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode