08-17-2010 09:57 PM - edited 03-16-2019 12:18 AM
Dears,
I have CCM6 installed and using MGCP to control my vgw. I have route pattern, for example 9.050xxxxxxx which points to FXO port (PSTN). Is there an option to limit call duration, sent trought this FXO, say, to 3 minutes, and, when this port becomes unused, inform first user, who tried to use this line that this line is free now.
Thank you!
08-23-2010 12:27 PM
There is no feature within CUCM that I am aware of which can do this.
Sorry.
--Matt
08-23-2010 12:35 PM
You'd need to switch to H323 and the use of a custom script.
https://supportforums.cisco.com/message/3163105#3163105
EDIT: that's just for the time limitation, letting the user know the line is free is not possible.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
08-23-2010 12:43 PM
Thank you Javalenc for pointing to my work.
My script (once released), is also able to call back, inform that the line became free and give dialtone.
08-23-2010 12:48 PM
You're welcome Paolo, I thought your script would only do the time limit but it seems you covered everything a user would want it to do. =)
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
08-23-2010 12:54 PM
As an ancient say says:
"Let the power of TCL walk by your side,
To the nearest CO, there is free wire inside".
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: