08-17-2010 09:57 PM - edited 03-16-2019 12:18 AM
Dears,
I have CCM6 installed and using MGCP to control my vgw. I have route pattern, for example 9.050xxxxxxx which points to FXO port (PSTN). Is there an option to limit call duration, sent trought this FXO, say, to 3 minutes, and, when this port becomes unused, inform first user, who tried to use this line that this line is free now.
Thank you!
08-23-2010 12:27 PM
There is no feature within CUCM that I am aware of which can do this.
Sorry.
--Matt
08-23-2010 12:35 PM
You'd need to switch to H323 and the use of a custom script.
https://supportforums.cisco.com/message/3163105#3163105
EDIT: that's just for the time limitation, letting the user know the line is free is not possible.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
08-23-2010 12:43 PM
Thank you Javalenc for pointing to my work.
My script (once released), is also able to call back, inform that the line became free and give dialtone.
08-23-2010 12:48 PM
You're welcome Paolo, I thought your script would only do the time limit but it seems you covered everything a user would want it to do. =)
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
08-23-2010 12:54 PM
As an ancient say says:
"Let the power of TCL walk by your side,
To the nearest CO, there is free wire inside".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide