I have inherited a VPN Concentrator and want to configure it to provide remote access back to my internal lab network when I am on travel. Private interface is configured as 192.168.1.240/24. Public interface is configured as one of my public IP addresses. I have a pool of public IPs on the backside of a roadrunner cable modem. I have created a pool of addresses for the clients as 192.168.1.200 through 192.168.1.205. I have created all the base group, group, and user configurations.
In the IP Routing tab, I see a default route pointing to my public gateway IP address - the gateway IP address of my roadrunner cable modem box.
From my VPN client, I am able to make a connection to the VPN concentrator. I get an address from the pool and checking the tunnel details under statistics shows the correct pool IP address for the client and the correct public IP address of my VPN concentrat
From the statistics, it seems that client is sending traffic to the Concentrator, however its not getting reply back.
We will need to check the settings on concentrator itself.
I will need to check the concentrator settings, and as its a GUI based device so i cant even ask for show tech and the only available option is to do webex.
Are you ok with webex session, pls lemme the comfortable time and email id to send the invite, it should not take a longer time and we will figure it out