sh dlsw reachability searching

Unanswered Question
Aug 19th, 2010

Hello,

I am trying to configure dlsw between two remote networks and it is very very slow. I wonder why the router is not founding some local macs. Could you please give me some advices? This is the show commands output

sh dlsw reach

DLSw Local MAC address reachability cache list
Mac Addr         status     Loc.    port                 rif
0006.299c.1cb9   SEARCHING  LOCAL
0040.cd53.c834   SEARCHING  LOCAL
0040.cd53.c8e4   SEARCHING  LOCAL
0064.99c6.5903   FOUND      LOCAL   TBridge-001    --no rif--
1000.5a58.05f3   SEARCHING  LOCAL
1000.d000.1244   SEARCHING  LOCAL
1000.d000.1261   SEARCHING  LOCAL
1000.d000.6800   SEARCHING  LOCAL
1000.d000.a809   SEARCHING  LOCAL
1000.d07f.04aa   SEARCHING  LOCAL
1000.d07f.90bc   SEARCHING  LOCAL
1000.d07f.b5b9   SEARCHING  LOCAL
4200.0099.8984   SEARCHING  LOCAL
4200.24ff.66c3   FOUND      LOCAL   TBridge-001    --no rif--

sh dlsw circuits

Index           local addr(lsap)    remote addr(dsap)  state          uptime
2617245708      0090.d6a6.6933(04)  4200.0099.8980(04) CONNECTED      03:16:46
Total number of circuits connected: 1

sh dlsw peer

Peers:                state     pkts_rx   pkts_tx  type  drops ckts TCP   uptime
TCP 10.10.218.241   CONNECT     327135     59912  conf      0    1   0 03:19:36
Total number of connected peers: 1
Total number of connections:     1

interface Vlan229
description LINEA ADMINISTRATIVA
ip address 10.60.229.240 255.255.255.0 secondary
ip address 10.60.2.240 255.255.255.0
no ip redirects
bridge-group 1
llc2 ack-max 255
llc2 local-window 2
llc2 t1-time 10000

interface Vlan232
description LINEA SISTEMA ESPEJO AS/400 CONTINGENCIA
ip address 10.60.232.240 255.255.255.0
ip policy route-map FRAGMENT
bridge-group 1
end

Thanks!!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content