want to configure two tunnels over the internet, I just want to get more input, how to solve the problem, that when a tunnel fails, that the traffic will be shifted over to the other tunnel.
Now the problem is, that the loopback is reachable also through the main connection.
I am thinking to use a track command, that allows me something like this
track 10 ip route 10.0.0.100 255.255.255.255 reachabillity (need this but only over a certain interface, in this case the tunnel1)
Otherwise the loopback 10.0.0.100 is also available thrught the main link when the tunnel is working.
using the interface as determination is not working, since the tunnel is (unless the physical link is down) always up.
anyone knows a command to have the track only check the loopback availabillity over a specific interface?
(like an extended ping with a source parameter i.e. ping 10.0.0.100 source interface tunnel1)
thx for the input