cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
567
Views
0
Helpful
1
Replies

WAP2000 Problem

adychesjr
Level 1
Level 1

Hi, I recently purches a WAP 2000 and would like to add it to our network but I am having a terrible time.  I've plugged it in, but I cannot access it via it's default ip/gateway.... the instruction say to use 192.168.1.245... however our router dishes out IP's like 99.14.72.166.... how can I access the router config to get it on the same page?

Thanks in advance for your help!

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

Alan,

Not familiar with WAP, but before connecting it to the network you may need to configure it as standalone first.  Connect it to your laptop and give it an IP in the same range that is in the instruction.  Once you are in, than you can deploy the IP, DNS, DHCP, username, password, etc.....  then connect it to the network

WAP                                        laptop                                

192.168.1.245-------------------------192.168.1.246

HTH

Reza

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: