SCCP on 9900/8900 series phones with CUCM 7/8 is this possible?

Answered Question
Aug 23rd, 2010
User Badges:

Hi ,



Is sccp an option with the new 99/8900 series phones?


In CUCM when we add a new we only get a SIP option 99xx i belive. is there a service parametre or device pack we need to install to get sccp happening?


Also - if we have to use SIP is there any specific requirements in CUCM  for the dial plan outside what we normally do with SCCP i.e. install dial-plan route filters


Thank you

Correct Answer by Paolo Bevilacqua about 6 years 7 months ago

With CM, SIP phones do work same as SCCP ones.


Please remember to rate useful posts clicking on the stars below.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Paolo Bevilacqua Mon, 08/23/2010 - 02:37
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

These phones only support SIP.


Hoefully Cisco will realize the limitation that this implies f(or CME especially), and come out with SCCP firmware in the future.

shaftstri Mon, 08/23/2010 - 02:46
User Badges:

Thanks for quick response


Quick one - does having SIP phones impact the dial plan , by this I mean is there specific config required outside the norm?


Any CUCM requirement

Any SRST h323 GW requirement



KPML ??


or they will work like a sccp configured phone???


Thanks

Correct Answer
Paolo Bevilacqua Mon, 08/23/2010 - 02:50
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

With CM, SIP phones do work same as SCCP ones.


Please remember to rate useful posts clicking on the stars below.

Actions

This Discussion