Gatekeeper on 2911 missing commands

toby.lewis · ‎08-23-2010

I have got a 2911 with the c2900-universalk9-mz.SPA.150-1.M2.bin IOS on it, The software advisor tells me it has Gatekeeper functionality, and if you do a Show Licence you can see an Eval licence in it.

But there are not Gatekeeper commands in the router?

I am aware that you need to add a licence to the Router to give it the functionality permanently, but have always configured it on the Eval licence whilst waiting for the real one to come through.

Anyone have any ideas how I now activate the GK functions on this router while I am waiting for the full licence? Or even if the full licence will bring the commands back?

T

paolo bevilacqua · ‎08-23-2010

Have you actually activated the evaluation license ?

toby.lewis · ‎08-23-2010

If I do a show licence I get the following

Index 5 Feature: gatekeeper

Period left: 8 weeks 4 days

License Type: Evaluation

License State: Active, Not in Use, EULA not accepted

License Count: Non-Counted

License Priority: None

But I have not specifically activated it. Are there commands to activate them as I am looking, but have not seen one yet.

T

paolo bevilacqua · ‎08-23-2010

From

http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1146337

follow examples.

you can also send feedback to cisco as the gatekeeper example is missing, linking instead to a not explicative document.

Please remember to rate useful posts clicking on the stars below.