08-23-2010 05:43 AM - edited 03-06-2019 12:36 PM
Hi,
I am planning VSS installation with one ACE and FWSM per physical chassis. As FWSM is "behind" the ACE I have
no problem using RHI, but I was wondering is RHI supported in VSS scenario or not?
08-23-2010 08:58 AM
Hi Pavel,
There is no interoperability between FWSM Release 4.0 RHI feature and VSS integration
Here is the document
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/product_bulletin_c25-478751.html
Now, this is based on older IOS version of SXI and don't know if it is integrated in SXI4a.
HTH
Reza
08-23-2010 10:12 AM
Hello Reza,
thank you for your reply, but I must admit that I am a little bit confused (this is because I don't have hands on experience with ACE and RHI), but I am wondering, why should I care if FWSM does not support RHI, as in my case ACE would have a "direct connection" to MSFC, so FWSM is behind ACE, and is not problem for RHI to work, or I am terribly wrong?
08-23-2010 02:34 PM
Pavel,
Are you running the FWSM in transparent mode or a routed mode?
Jeremy
08-23-2010 10:18 PM
Hi Jeremy,
we are running FWSM in routed mode.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: