ASDM 6.3(1) on ASA 5520 8.2(2) is showing empty service-groups...

Thomas Winther · ‎08-23-2010

Hi there,

I just discovered that my ASDM 6.3(1) is ignoring all my "service-object tcp [blabla]", "service-object udp [blabla]" and "service-object tcp-udp [blabla]" from my ASA 5520 v.8.2(2).

That means that some service-groups show up as empty in the ASDM.

I suspect ASA -> ASDM versions to be incompatible. Can anyone confirm my suspicion?

Thanks!

/Thomas Winther

Nagaraja Thanthry · ‎08-23-2010

Hello,

Do you have "destination" keyword in those service-objects? If yes, it seems

like 6.3 will be incompatible with your configuration/ASA code version. You

can downgrade the ASDM version to 6.2.

Hope this helps.

Regards,

NT

Thomas Winther · ‎08-23-2010

No, there is no "destination" keyword in my current config'd service-object.

But I think you might be close... If I add a new servicegroup in the ASDM, and previews the lines before submitting, they actually have "destination" keyword. So maybe ASDM 6.3(1) only accepts service-objects with destination defined..?

//Thomas

Nagaraja Thanthry · ‎08-23-2010

Hello,

The issue is documented in CSCtf77014. It seems like the ASDM tries to add

the "destination" keyword which is not recognized by the 8.2 code. Please

try downgrading the ASDM to 6.2 and see if that helps.

Regards,

NT