IP Phones 7912 - CM 7.1.5

Unanswered Question
Aug 23rd, 2010
User Badges:


I had installed the CM 7.1.3 and now i upgraded it to 7.1.5. When i apply the softkey configuration to 7912 ip phones, i can not see the AbbrDial Softkey.

I loaded the last  firmware version for that type of phone on the CUCM but it not work.

Thanks for you help

Best regards

Jose Luis Arango Carvajal

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jaime Valencia Mon, 08/23/2010 - 09:40
User Badges:
  • Cisco Employee,
  • Hall of Fame,


You do not add that softkey to the softkey template, it's already there.

While on-hook dial 1 digit and you should see it appear.

If you mean for off-hook follow these instructions.

Off-Hook Abbreviated Dial




If this helps, please rate


Jose Arango Mon, 08/23/2010 - 09:56
User Badges:

Yeah you are right it is in offhook but the Abbr Softkey does not appear, it´s the same for 7911 ip phones.


This Discussion