Hi,
I am setting up a backup site. We will have a gig-e private metro ethernet from Atlanta to Tampa, very expensive >$9000 per month so I am trying to maximize it. I want to create three vlans on the metro ethernet link, one for internet traffic, one for private traffic, one for dmz traffic. Tampa has two 7206 routers, r1 and r2 each with one internet provider savvis, qwest, i run ibgp between r1 and r2 . I will be adding r3 in atlanta and atlanta will have internet provider level3. I would like to run ibgp between tampa and atlanta for load sharing. I also would like the servers in tampa to be able to use the internet in atlanta and vice versa. On the lan side I would like to be able to route my lans over the second vlan. There is also a DMZ in tampa I want to be able to access from the dmz in atlanta. I would like different subnets for the dmz and lan in atlanta than tampa.
can someone give me some ideas.
TAMPA
-----------
r1-
fe0/1ip address 200.10.10.1 WAN
qwest 100mb
r2-
fe0/1 ip address 200.10.10.2 WAN
savvis 45mb WAN
metrolan 1gig
vlan 10 ip address 10.0.10.1 LAN
vlan 20 ip address 192.168.0.1 DMZ
vlan 200 ip address 200.10.11.1 WAN
s1-
vlan 10 subnet 10.0.10 LAN
vlan 20 subnet 192.168.0 DMZ
ATLANTA
---------------
r3-
ethernet 200.10.11.1 WAN
level3 internet 1 gig
metrolan 1gig
vlan 10 ip address 10.0.10.2
vlan 11 ip address 200.10.11.2
s2
vlan 11 ip address 10.0.11
vlan 21 ip address 10.0.21