Uploading logo in default web authentication page @ WLC 5508

Unanswered Question
Aug 24th, 2010
User Badges:

Hi,


I trying to upload my company logo in the Web Authentication page @ WLC 5508. In GUI can see an option for cisco logo that says view or hide but i dont see any other option to upload custom logo. I tried to upload my gif/jpg image using TFTPD32 but not working. I did the following...




(Cisco Controller) >(Cisco Controller) >transfer download mode ftp

(Cisco Controller) >transfer download datatype image

(Cisco Controller) >transfer download serverip 2.2.2.12

(Cisco Controller) >transfer download path D:\Test

(Cisco Controller) >transfer download filename test1.GIF

(Cisco Controller) >transfer download start


Mode............................................. TFTP Data

Type........................................ Login Image TFTP

Server IP................................... 2.2.2.12TFTP Packet

Timeout.............................. 6TFTP

Max Retries................................. 10TFTP

Path........................................ D:\Test/

TFTP Filename.................................... test1.GIF


This may take some time.Are you sure you want to start? (y/N) y


TFTP Image transfer starting.% Error: Image file transfer failed - Error from server: File not found


(Cisco Controller) >ping 2.2.2.12Send count=3, Receive count=3 from 2.2.2.12




I verified both path and file and they are fine. Is there an option were i can upload the image file ???


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Stephen Rodriguez Tue, 08/24/2010 - 09:19
User Badges:
  • Purple, 4500 points or more

where does your TFTP point to for it's "root" folder?  if it already points at D:\Test, then you only need to put the / for the path

Actions

This Discussion

 

 

Trending Topics - Security & Network