Filter some messages from logging.

Unanswered Question
Jitendriya Athavale Tue, 08/24/2010 - 07:48
User Badges:
  • Cisco Employee,

if you are asking how to not see these messages in your logging, you can move these messages to a higher level of logging so that way you wont see these messages in the logging level you have defined

these messages are level 3 and if you are logging at level 6 you can make these messages appear as level 7, so that you wont see them

here is the link that will help you

if you want to send these messages to a different syslog server or want to log it to a different place you can make logging event list

here is a link

please feel free to ask if you have any clarifications

Kureli Sankar Tue, 08/24/2010 - 08:06
User Badges:
  • Cisco Employee,

I am not sure what you are asking.  You like to filter these message once they arrive on the syslog server?

These messages are logged at level 6.  You can send these to the syslog server with the logging trap 7 command.

If you want to logg to the buffer and only logg level 5 or 4 to buffer then you will not see these in the buffer logs.

logging trap 7

logging buffer 4


Kureli Sankar Tue, 08/24/2010 - 08:16
User Badges:
  • Cisco Employee,

Hmm...without using "no logging message" I can't think of a way.

Like you say, using a log list for a range of syslogs (may be a log list of loglist) and not including these two syslogs might work. Give it a shot.

logging list loglist message xxxxxx-yyyyyy

logging trap loglist



This Discussion