QoS on BRI interface

Unanswered Question
Aug 26th, 2010
User Badges:


I have got a Cisco 1841 on a remote site with an ISDN BRI with multilink activated.

I have defined the interface as 128 k of bandwidth and want to apply the following  QoS policy.

int bri0/0/0

bandwidth 128

class-map match-any CriticalApps
match access-group 120
class-map match-any CCP-Voice-2
match  dscp ef

class-map match-any CCP-Signaling-2
match  dscp cs3
match  dscp af31

policy-map CCP-QoS-Policy-2
class CCP-Voice-2
  priority percent 10
class CCP-Signaling-2
  priority percent 10
  class CriticalApps
  bandwidth percent 40
class class-default
bandwidth percent 25 

int bri0/0/0

bandwidth 128

service-policy output CCP-QoS-Policy-2

I wanted to know if the policy will be working on the 64k or 128 k basis.

The ACL only filters trafic to application servers.

Can i go ahead with this configuration.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion