Solved: 3825 and ipv6

Nicholas Wysocki · ‎08-26-2010

Does the 3825 support ipv6?

If so how do you enable it?

i am running the advanced security 15.1(2) software.

paolo bevilacqua · ‎08-26-2010

Feature set on a 3825 means software image.

For licensing issues, contact your cisco sales office or reseller.

Please remember to rate useful posts clicking on the stars below.

kyukim · ‎08-26-2010

Hi,

3825 supports IPv6 but you need to change features set from security to Adv IP or Enterprise or SP.

Here is config guide.

conf t

ipv6 unicast-r

int x/x

ipv6 address 2001:0DB8:0:1::x/64

KK

Nicholas Wysocki · ‎08-26-2010

Thats what i thought and i looked at that document. But the commands are not there.

there is no: ipv6 cef , or ipv6 cef distributed.

there is no ipv6 address cmd under the interface.

any ideas?

paolo bevilacqua · ‎08-26-2010

Read the post above:

3825 supports IPv6 but you need to change features set from security to Adv IP or Enterprise or SP.

Nicholas Wysocki · ‎08-26-2010

are the feature set the same and what about license? the reason we had to go with security was to use parts of bgp at version 12.4.

kyukim · ‎08-26-2010

Hi,

It is up to the contract you have with CISCO.

You can try to download IOS from www.cisco.com/tac. Login with your CCO ID.

If your contract is good enough, you can download ADV IP from http://www.cisco.com/cisco/web/download/index.html

ADV IP will have all BGP supports, so you can download ADV IP feature set.

KK

paolo bevilacqua · ‎08-26-2010

Feature set on a 3825 means software image.

For licensing issues, contact your cisco sales office or reseller.

Please remember to rate useful posts clicking on the stars below.