I am facing a problem while doing PBR through a WS-C3750G-12S switch with IOS c3750-ipservicesk9-mz.122-55.SE.bin.
While i am trying to apply the ip policy route-map command to the VLAN interfaces it's not taking, thats why i am not able to implement PBR on the switch.
I have two Internet routers attached to the core switch. i want to divert some vlan through router1 and rest through router 2. Attaching the configuration
ip access-list extended ISP1
permit ip 192.168.2.0 0.0.0.255 any
permit ip 192.168.1.0 0.0.0.255 any
permit ip 192.168.3.0 0.0.0.255 any
ip access-list extended ISP2
permit ip 192.168.4.0 0.0.0.255 any
permit ip 192.168.5.0 0.0.0.255 any
permit ip 192.168.6.0 0.0.0.255 any
ip sla enable reaction-alerts
route-map CGCINT permit 10
match ip address ISP1
set ip next-hop 192.168.101.2
route-map CGCINT permit 20
match ip address ISP2
set ip next-hop 192.168.30.6
Any help in this reagrd shall be highly appreciated.
Thanks and Regards