CUCM 4.1 and IPCC 4 Upgrade to 7.x

Answered Question
Aug 30th, 2010

Hi All,

I have a customer with a need to get their IPCC and CallManager environment back into maintenence.

Both the CUCM and IPCC are running on HP DL380G4 servers (HP branded - not MCS78xx)

What would the most cost effective method of upgrading them to ver. 7 of UCM and IPCC be without obtaining new hardware ?

There is no UCSS or ESW on either servers.

Thanks in advance.

Phil

I have this problem too.
0 votes
Correct Answer by philip.e.denton about 6 years 3 months ago

Mostly likely the cheapest way would be to have them get their UCSS/ESW up to date as that would entitle them to free upgrades.  You could of course order the products new but it's going to cost an arm and a leg.  You'd have to check with your local Cisco Account Team to get their opinion though.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
philip.e.denton Mon, 08/30/2010 - 07:52

Mostly likely the cheapest way would be to have them get their UCSS/ESW up to date as that would entitle them to free upgrades.  You could of course order the products new but it's going to cost an arm and a leg.  You'd have to check with your local Cisco Account Team to get their opinion though.

Actions

This Discussion