Hi.

I have a 1760 with a 1 ADSL port, the carrier have a problem in the network and when carrier resolved the problem my internet connection is not restored, if I connect the carrier modem (2wire) the internet connection work, I changed the spliter, cable and wic, the status of the atm interface is line down and protocol down

When connect the modem provider, I note that the speed was increased to 4mb

This is the config:

interface ATM0/0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
pvc 8/35
  pppoe-client dial-pool-number 1
!

I enabled debug atm events and have a error

Apr 17 05:16:56.772: DSL(ATM0/0): Sent command 0x14
Apr 17 05:16:58.783: DSL(ATM0/0):changed current state to do open!!
Apr 17 05:16:58.783: DSL(ATM0/0): Send ADSL_OPEN command.
Apr 17 05:16:58.783: DSL(ATM0/0): Using subfunction 0x15
Apr 17 05:16:58.783: DSL(ATM0/0): Sent command 0x3
Apr 17 05:17:01.283: DSL(ATM0/0): 1: Modem state = 0x8
Apr 17 05:17:03.783: DSL(ATM0/0): 2: Modem state = 0x8
Apr 17 05:17:04.100: DSL(ATM0/0): Received response: 0x22
Apr 17 05:17:04.104: DSL(ATM0/0): Open failed:Error in early non-CRC message or
in first CRC-covered message -- retrying
Apr 17 05:17:04.104: DSL(ATM0/0): Sent command 0x4
Apr 17 05:17:04.104: DSL(ATM0/0): Send ADSL_OPEN command.
Apr 17 05:17:04.104: DSL(ATM0/0): Using subfunction 0x15

I need help to resolve this problem

Thanks.