08-30-2010 04:29 PM - edited 03-16-2019 12:32 AM
Hello all-
We have a 3945 CME located in our central office in Eastern timezone. I'm trying to figure out if there is a way to force the phones located in our branch offices in Central timezone to adjust the time display on screen. I know this is possible with Call Manager but wasnt sure if there was a way to force individual ephones to use different timezones with a Call Manager Express.
We are running the latest release of CME.
Thanks for your assistance!
-Kenny
08-30-2010 04:33 PM
Hello Kenny
I dont beilive that CME is able to use more than one time zone, the reason is because we dont have the "device pool" feature that we have in CUCM, in CME all the phones registers with the one CME that has an standar configuration.
HTH
Please rate this post if was helpful
Walter Solano
08-30-2010 04:48 PM
Thanks for the quick response Walter.
Wasn't there a command on the ephone for adjusting timezone for an indidivudal phone? I thought there was another way to adjust time besides setting up the device pools and assigning the phone to the site? Or perhaps some way I could assign a different NTP server with Central timezone offset for certain phones??
08-30-2010 05:25 PM
As Walter explained above (rated), unfortunately it is not possible to do that.
08-30-2010 05:26 PM
Thank you Paolo for the confirmation!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide