08-30-2010 11:04 PM - edited 03-21-2019 02:56 AM
Hi All,
I have activated meet me conferencing and restarted the IP phones. Problem is when I dial the pilot number I get "cannot complete conference" and also the meet me soft key is not presented on the phone after reboot. I know my process to activate it works because I have had it working on another system.
Appreciate the assistance.
Steve
Solved! Go to Solution.
08-31-2010 05:00 AM
Hi Steve,
You are going off hook on the ip phone and pressing the more then meetme button and then dialing the mm number (771) to start it, right?
I saw this a few times in older SW, and this used to help. Try disabling live record, then reenable live record, then try again.
Let me know which SWP and CCA versions too.
08-31-2010 05:00 AM
Hi Steve,
You are going off hook on the ip phone and pressing the more then meetme button and then dialing the mm number (771) to start it, right?
I saw this a few times in older SW, and this used to help. Try disabling live record, then reenable live record, then try again.
Let me know which SWP and CCA versions too.
08-31-2010 06:13 PM
Thanks Steven,
That did the trick, running the latest software. All good now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide