08-30-2010 11:34 PM - edited 03-11-2019 11:32 AM
Dear all,
I would like to allow port forwarding on ASA 5510 between port 100 to 1500, but i don't know which command that allow allow of port?
if only one port i can do like
static (inside,outside) tcp interface 25 192.168.1.13 25 netmask 255.255.255.255
but i want to allow start from port 100 to 1500( i mean that 100,101,102,1003----1498,1499,1500)
How can we do on thies?
Best Regards,
Rechard
08-31-2010 06:10 AM
Hi,
Port forwarding will allow to redirect a connection from one port to another (single port).
So, you can have multiple statements for multiple ports.
But if you're looking for a ''range'' option, there's no such thing.
You either redirect based on multiple entries (one for each port) or use another IP address that you can statically NAT.
Federico.
08-31-2010 06:16 AM
Hello,
If you want to forward a whole range of ports from outside to inside,
upgrade the code to 8.3. In 8.3, you can forward a range of ports from
outside to inside.
object network test1
host 10.1.1.1
object network test2
host 100.1.1.1
object service ports
service tcp source range 100 1500
nat (inside,outside) source static test1 test2 service ports ports
Hope this helps.
Regards,
NT
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: