cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
614
Views
0
Helpful
1
Replies

Core Switch 6509-E Boot Problem

a_mohammedy
Level 1
Level 1

i have a problem with Cisco Core Switch 6509-E in its boot as following:
------------------------------

------------------------------------------------------------------------------
rommon 3 > dir bootflash:

Initializing ATA monitor library...
Directory of bootflash:

2      74788836  -rw-     s72033-ipservicesk9_wan-mz.122-33.SXH5.bin
9132    33554432  -rw-     sea_log.dat
rommon 4 > boot bootflash:s72033-ipservicesk9_wan-mz.122-33.SXH5.bin
Please reset before booting
rommon 5 > reset

System Bootstrap, Version 8.5(4)
Copyright (c) 1994-2009 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

rommon 1 > boot bootflash:s72033-ipservicesk9_wan-mz.122-33.SXH5.bin
Loading image, please wait ...

Initializing ATA monitor library...

Self extracting the image... [OK]
Self decompressing the image : ################################################################################################################################################################ [OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706


Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9_WAN-M), Version 12.2(33)SXH5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Thu 16-Apr-09 19:33 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x41C65B30

00:00:04: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:04: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch

00:00:06: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:04: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

Firmware compiled 19-Feb-09 13:10 by integ Build [100]


00:00:06: %OIR-SP-6-CONSOLE: Changing console ownership to route processor

System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 524288 Kbytes of main memory

rommon 1 >

please advise ASAP
1 Reply 1

Chad Peterson
Cisco Employee
Cisco Employee

Your MSFC's config register is likely 0x0.

Once it gets to that point do 'set' and paste the output.

At that point you can boot it manually using the boot: command.

Review Cisco Networking products for a $25 gift card