Core Switch 6509-E Boot Problem

Unanswered Question
Aug 31st, 2010
User Badges:

i have a problem with Cisco Core Switch 6509-E in its boot as following:
------------------------------

------------------------------------------------------------------------------
rommon 3 > dir bootflash:

Initializing ATA monitor library...
Directory of bootflash:

2      74788836  -rw-     s72033-ipservicesk9_wan-mz.122-33.SXH5.bin
9132    33554432  -rw-     sea_log.dat
rommon 4 > boot bootflash:s72033-ipservicesk9_wan-mz.122-33.SXH5.bin
Please reset before booting
rommon 5 > reset


System Bootstrap, Version 8.5(4)
Copyright (c) 1994-2009 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

rommon 1 > boot bootflash:s72033-ipservicesk9_wan-mz.122-33.SXH5.bin
Loading image, please wait ...


Initializing ATA monitor library...


Self extracting the image... [OK]
Self decompressing the image : ################################################################################################################################################################ [OK]

              Restricted Rights Legend


Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.


           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9_WAN-M), Version 12.2(33)SXH5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Thu 16-Apr-09 19:33 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x41C65B30


00:00:04: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:04: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch


00:00:06: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.


00:00:04: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.


Firmware compiled 19-Feb-09 13:10 by integ Build [100]



00:00:06: %OIR-SP-6-CONSOLE: Changing console ownership to route processor



System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 524288 Kbytes of main memory

rommon 1 >

please advise ASAP
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
farasidd Tue, 08/31/2010 - 07:38
User Badges:

Your switch is getting into rommon after giving the control out to RP . Can you paste the rommon variables of RP here ,


do a "set" on RP rommon prompt .

Actions

This Discussion