08-31-2010 04:58 AM - edited 03-04-2019 09:36 AM
Hello,
We have the following network topology:
- MAN ring (4 6500 switches connected in ring) in OSPF area 0
- remote location with 3750 stack connected via two fast ethernet uplinks to two of the cat 6500 in the MAN ring - this 3750 is in the different OSPF area.
The question is: where should we have area 0 boundary?
1. On the remote 3750 - making it ABR router, and placing fast ethernet uplinks in the area 0 ?
2. On the 6500's belonging to the main MAN ring, placing fast ethernet uplinks in the "remote" OSPF area ?
Basically: should the remote OSPF area reach the core switches, or should it end in the remote location?
regards
WM
08-31-2010 05:50 AM
Hello WM,
I believe that the 2nd alternative would be more correct - make the 6500s the ABRs, and the 3750 should be internal routers in non-backbone areas. Consider the fact that OSPF on backbone routers is potentially very memory-intensive. In addition to all the LSA1 and LSA2 local to the backbone area, backbone routers need to store all LSA3, LSA4 and LSA5 generated for all inter-area routers, ASBRs and external networks. That could put unnecessary memory and processing burden on your 3750 switches. With the 3750 switches being internal in non-backbone areas, you can then designate those areas as stubby or totally stubby and decrease the size of link-state database on the 3750 switches.
This my rationale - but I am very much looking forward to hearing opinions of other friends here.
Best regards,
Peter
08-31-2010 05:58 AM
WM
I agree with Peter that the 6500 is a better choice to be ABR than 3750. If the network were larger, with many remote areas and many router/switches I might suggest keeping the core routers as internal area 0 only and distribute the ABR function to router/switches in the remote areas, thus allowing the core switches to focus on core routing. But in a network the size that you describe I agree that making the 6500 to be ABR is preferable.
I might also suggest that you consider making the non zero area to be a stub (or even totally stubby) area. This will reduce even more the processing load on the 3750 for processing OSPF.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide