a question or more a problem with netflow exports on Cisco 2821's.
I configured netflow export on a Cisco 2821 with IOS Version 12.4(24)T
description to XXX
ip address XXX
ip flow ingress
ip flow egress
ip flow-cache timeout active 1
ip flow-export source GigabitEthernet0/0
ip flow-export version 5
ip flow-export destination XXX XXX
The netflow collector shows "only ingoing traffic" on interface FastEthernet0/0/0 and
"only outgoing traffic" on interface GigabitEthernet0/0.
Same problem with an IOS Version 12.4(20)T1 on other Cisco 2821's.
But same configuration on other Cisco 2821's with IOS Version 12.4(11)XJ4 work well.
Any references/suggestions or explanations?