cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
477
Views
0
Helpful
3
Replies

Setting up ACD-AA Script

I'm stuck trying to configure acd-aa script version 3.0.0.2 on a CME version 12.4(24)T, I follow the configuration guide of others routers on this forum but don't get what is missing.  I don't have a hunt-group configured cause there is only one operator, the operator extension is 202, and this are the lines configured:

application
service aa flash:app-b-acd-aa-3.0.0.2.tcl
  paramspace english index 1
  param number-of-hunt-grps 1
  param handoff-string aa
  param dial-by-extension-option 1
  paramspace english language en
  param aa-pilot 220
  paramspace english location flash:
  param second-greeting-time 30
  param welcome-prompt _bacd_welcome.au
  param call-retry-timer 15
  param max-time-call-retry 700
  param service-name queue
!       
service queue flash:app-b-acd-3.0.0.2.tcl
  param aa-hunt 202
  param queue-manager-debugs 1
  param number-of-hunt-grps 1

!
interface Loopback0
ip address 172.16.32.32 255.255.255.255

!
dial-peer voice 220 voip
service aa
destination-pattern 220
session target ipv4:172.16.32.32
incoming called-number 220
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad

When I dial pilot extension 220, I get an error tone, if you got this application running, please check for the lines above to check on what I'm wrong.

Thanks,

3 Replies 3

Sorry, this is not the correct category.

configure param voicemail why dont you just cut and paste this config thats what everybody does because it works

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html

Thanks

Thanks for your help, today it's running the application, thanks anyway.

Regards,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: