Mobile Voice Access (MVA) problem

Unanswered Question

Hi Guys,

I based on the administrator guide to setup the mobile voice access features in my cucm7, but it's not work, when I dialed the number from outside, I hear "Your call cannot be completed as dial..." I summary the steps below, please check anything is missing or wrong, thanks for your help.

1. Create a remote destination number(RDN)

2. Create a remote destination profile(RDP) and associate with the RDN

3. Create a user, enable mobile voice access and select the RDP

4. Enable the Enterprise feature Access and Mobile Voice Access in service parameter

5. Configure the Mobile Access DN(520)

6. Configure the voice gateway


    service mva http://cucm_ip:8080/ccmivr/pages/IVRMainpage.vxml

   dial-peer voice 10 pots

    service mva

    incoming called-number 520


   dial-peer voice 20 voip

    destionation-pattern 5..

    session target ipv4:cucm_ip

    dtmf-relay h245-alphanumeric

    codec g711ulaw

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion