How to enable "Calling tone" for PVDM2 DM?

Unanswered Question

Hello,


I hope someone can help me to enable the 1300Hz calling tone in making an outgoing data call a PVDM2 ( reverse telnet ).

For the MICA Modems I can change the value of Register 27 ( ATS27=1 ) .

For the PVDM2 there is nothing described in the Cisco documentation how I can switch the calling tone on.


This is our hardware:


------------------ show inventory ------------------


NAME: "3825 chassis", DESCR: "3825 chassis"

PID: CISCO3825         , VID: V04 , SN: FCZ1146718U


NAME: "1 port channelized and PRI T1/E1 HWIC on Slot 0 SubSlot 0", DESCR: "1 por

t channelized and PRI T1/E1 HWIC"

PID: HWIC-1CE1T1-PRI   , VID: V01 , SN: FOC12060D52


NAME: "24 port PVDMII digital modem on Slot 0 SubSlot 4", DESCR: "24 port PVDMII

digital modem"

PID: PVDM2-24DM        , VID: V01 , SN: FOC10354YN3


NAME: "Eight Port Low-Speed A/S Serial on Slot 1", DESCR: "Eight Port Low-Speed

A/S Serial"

PID: NM-8A/S=          , VID: 1.0, SN: 28887743


thanks

Klaus Hebel

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion