09-02-2010 06:10 AM
Hello,
I am trying to figure out what is the equivalent command to configure the IOS "snmp-server enable traps config" on a Nexus 5020 running NX-OS version 4.2.1.N2.1 ,can someone please help me with this problem.
Also I would like to know if there is a cisco howto document or tool to migrate from IOS to NX-OS ?
Any help is greatly appreciated
Thanks
Frank
09-10-2010 04:59 AM
I see same command in my lan N5k. Also config change trap is enabled by default
24.10.5020A.1(config)# show ver | inc .bin
kickstart image file is: bootflash:/n5000-uk9-kickstart.4.2.1.N2.1.bin
system image file is: bootflash:/n5000-uk9.4.2.1.N2.1.bin
24.10.5020A.1(config)# snmp-server enable traps c?
callhome Module notifications enable
cfs Module notifications enable
config Module notifications enable
24.10.5020A.1(config)# show snmp trap | grep config
config : ccmCLIRunningConfigChanged Yes
24.10.5020A.1(config)#
Is the Nexus 5000 not generating a trap after a config change?
09-13-2010 09:41 AM
Hello,
both Nexus 5k are not generating a trap after a config change, because on both Nexus running same NX-OS version show up the snmp-server enable traps config command. This is really strange behavior, because we are using the same software version for the Nexus 5k devices it doesn't make sense to me. In the meantime I checked the command line guide for this software version but the command wasnt showing up.
nx5k-mt-2# show snmp trap | grep config
nx5k-mt-2#
nx5k-mt-2# show snmp trap
--------------------------------------------------------------------------------
Trap type Enabled
--------------------------------------------------------------------------------
entity : entity_mib_change Yes
entity : entity_module_status_change Yes
entity : entity_power_status_change Yes
entity : entity_module_inserted Yes
entity : entity_module_removed Yes
entity : entity_unrecognised_module Yes
entity : entity_fan_status_change Yes
link : linkDown Yes
link : linkUp Yes
link : extended-linkDown Yes
link : extended-linkUp Yes
link : cieLinkDown Yes
link : cieLinkUp Yes
link : connUnitPortStatusChange Yes
link : fcTrunkIfUpNotify Yes
link : fcTrunkIfDownNotify Yes
link : delayed-link-state-change Yes
link : fcot-inserted Yes
link : fcot-removed Yes
callhome : event-notify Yes
callhome : smtp-send-fail Yes
cfs : state-change-notif Yes
cfs : merge-failure Yes
fcdomain : dmNewPrincipalSwitchNotify Yes
fcdomain : dmDomainIdNotAssignedNotify Yes
fcdomain : dmFabricChangeNotify Yes
rf : redundancy_framework Yes
aaa : server-state-change Yes
license : notify-license-expiry Yes
license : notify-no-license-for-feature Yes
license : notify-licensefile-missing Yes
license : notify-license-expiry-warning Yes
scsi : scsi-disc-complete Yes
fcns : reject-reg-req Yes
fcns : local-entry-change Yes
fcns : db-full Yes
fcns : remote-entry-change Yes
rscn : rscnElsRejectReqNotify Yes
rscn : rscnIlsRejectReqNotify Yes
rscn : rscnElsRxRejectReqNotify Yes
rscn : rscnIlsRxRejectReqNotify Yes
fcs : request-reject Yes
fcs : discovery-complete Yes
fctrace : route Yes
zone : request-reject1 Yes
zone : merge-success Yes
zone : merge-failure Yes
zone : default-zone-behavior-change Yes
zone : unsupp-mem Yes
vsan : vsanStatusChange Yes
vsan : vsanPortMembershipChange Yes
fspf : fspfNbrStateChangeNotify Yes
upgrade : UpgradeOpNotifyOnCompletion Yes
upgrade : UpgradeJobStatusNotify Yes
feature-control : FeatureOpStatusChange Yes
snmp : authentication Yes
nx5k-mt-2#
nx5k-mt-2#
09-15-2010 09:02 AM
I tested in my lab and I am seeing config change traps fine on my host.
You will not see it configuration since its default configuration. Are you seeing
other traps fine? If so, I say time to open a TAC case
09-20-2010 06:46 AM
Hi,
other traps are working fine, no problem at all .I will open a case at the Cisco TAC.
Thank you very much for your help
Frank
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: