New install Cisco 3527

Unanswered Question
Sep 2nd, 2010

Hi Guys,

We are using the IPVC-3527-GW1P at a customer site running CUCM 7.1

The IPVC-3527-GW1P has been added to CUCM as an H323 device and a partial pri connection
installed.

We are using polycom endpoints to make calls which have been added to CUCM as advanced sip
endpoint devices.The polycom devices can make calls between them internally.

The problem is when the polycome units try to dial out through the IPVC-3527-GW1P device.

We see the call go through,however the channels dont bond and the call fails.

However and audio only call is successfull through the IPVC-3527-GW1P unit.

Log is attached.

Could someone please help.

Cheers

Sahil

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion