we are having 2 analog lines connected to 2 fxo ports. Port 0/1/0(594) and 0/1/1(671). If i try to call the number 594 the call is working fine but if try to call 671 its not working, im able to hear the ringing sound but the call is not established. Im getting the following DSP error in my router and i found that the rotuer is hitting the Bug ID CSCse34097.
mbrd_e1t1_vic_connect: setup failed
flex_dsprm_voice_connect: voice tdm connect failed: voice-port(0/1/1), dsp_channel(/0/0/2).
Look the following output, when i dial the number 671 show voice call summary is showing rining but show voice port summary is still in on hook can any one explain me wat is the issue. And also let me know due to this error the call is not working
sh voice cal su
PORT CODEC VAD VTSP STATE VPM STATE
============== ======== === ==================== ======================
0/1/0 g729r8 n S_CONNECT FXOLS_CONNECT
0/1/1 - - - FXOLS_RINGING
sh voic p s
PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC
========= == ============ ===== ==== ======== ======== ==
0/1/0 -- fxo-ls up up idle off-hook y
0/1/1 -- fxo-ls up up idle on-hook y