Leo Laohoo Thu, 09/02/2010 - 15:42
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Yes.  Give us more information.

1.  What is the error message when you console into the AP that's searching for the WLC?

2.  Have you tried using the DNS entry?

3.  What is the firmware of your WiSM?

4.  Is your firewall setup correctly to allow the right ports to go through?

pswartz Fri, 09/03/2010 - 07:43
User Badges:

The Sup720 mod is running Version 12.2(17r)SX7

The WiSM is running version

I have not consoled into an AP yet as it is a remote site. Hoping to get there today

to do that.

I believe the firewall is set with the correct port, but need to double check.

How do you setup the use of the DNS entry?

Thank You for you help.



pswartz Fri, 09/03/2010 - 10:11
User Badges:

Console of AP:



George Stefanick Fri, 09/03/2010 - 16:48
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, October 2015

Can you provide more details like what the topology looks like ? You mention a firewall, etc ...

You can also console into an AP and watch the join process. Also run debug CAPWAP to watch the controller side.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode